[qrp-l.org] wilamette 20M board sizes?

[Steve Ratzlaff]

Thanks, Sam and RC,
I'd printed the layouts but had thought the pads were 5mm, then tried to 
determine the board size from that, which gave odd dimensions. (I was 
expecting something like 5" x 4", etc.). Knowing the pads are 3/16", I can 
find the board size from that. Apparently no one actually has measured the 
boards. :)  (I can do the same with the resized 1/4" pad layout, thanks RC.) 
(I get 4.3" x 3.8" for the 3/16" pads size--the intent is to know what size 
to cut my larger board stock to.)
Anyway, thanks much for the replies.
Steve
----- Original Message ----- 
From: "Sam M" <ka5oai at gmail.com>
To: "Steve Ratzlaff" <steveratz at wildblue.net>
Cc: <qrp-l at qrp-l.org>
Sent: Tuesday, August 19, 2008 11:14 AM
Subject: Re: [qrp-l.org] wilamette 20M board sizes?


> Steve Ratzlaff wrote:
>> Hi,
>> Does someone know the sizes for the Willamette 20M boards? I've looked, 
>> but don't see that information.
>> Thanks,
>> Steve
> here is the reply I recieved back March 15 from Jason when I ask that 
> question:
>
> <quote>
> If you go to the project web page:
>
> <http://www.nt7s.com/index.php5?page=qrplgp>
>
> and grab the two layout documents, you can get the exact board sizes.
> Print the PDF files with no scaling to get a 1:1 copy of the board and
> layout.
>
> 73,
> Jason NT7S
> </quote>
>
> -- 
> GB & 73
> KA5OAI
> Sam Morgan
> http://linuxbasics.org
> Linux, the lifetime learning experience.